Shower filter head | Andreine

The market today offers several solutions for filtering water. I chose one of the most effective ones, mainly to prevent hard water from getting on our skin and hair.

The ANDREINE filtering shower head with an activated carbon filter will ensure effective removal of harmful substances (especially irritating chlorine), deposits from water pipes and heavy metals. It will provide you with higher quality water that is gentler on the skin and hair, and showering will become not only a more pleasant but also a healthier experience.

The innovative designer shower head supports the overall health of your skin and hair and increases cell immunity.

After showering, your skin and hair are no longer burdened and dry. There will be no more unpleasant irritation, which is common due to the high chlorine content in water.

Hair will acquire a healthier appearance, and skin will be softer and unburdened. This designer shower head also has other advantages, such as a strong water flow, which ensures perfect rinsing of shampoo or other cosmetic products from hair and skin.

Benefits of the filtering shower head:

• removes harmful substances (chlorine, impurities, deposits, and heavy metals)
• eliminates bacteria formation on the scalp
• effectively ensures water savings
• supports skin and hair health
• increases cell immunity
• allows for better and faster shampoo rinsing
• prevents skin dehydration

The ANDREINE filter shower head is not only useful, but its design also makes it a perfect addition to any bathroom.

Get replacement filters right away so that the shower head can function flawlessly. Once the filter gets clogged with all those trapped impurities (after approximately 3 months of use), it needs to be replaced.

VIDEO PREVIEW:

Installation is simple. The filter head easily connects to the shower hose. Inside the handle, there's a carbon filter with inorganic silver, which needs to be replaced when the filter changes color. You can even monitor the filter's clogging through the transparent window. The filter's lifespan may vary in each household, as it depends on the water hardness level.

Precautions

• To completely flush out impurities in the water pipes.
• When water pressure exceeds 0.5 mPa, a pressure reducing valve needs to be installed. Pay special attention to keeping the shower away from the water heater, otherwise, it may damage the shower or even injure the user.
• It is normal for a small amount of residual water to remain in the product.
• Store in a dry and cool place, avoid direct sunlight and high temperatures.

Product function

• Filter material: Activated carbon fiber + fiber filter cotton
• Filter function: Can effectively remove chlorine, block impurities and metals from pipes
• Filter lifespan: up to 3 months (depending on water quality)
• Operating temperature: 5–60 °C

Cleaning and maintenance

1. When the water is not clear or the filter rod is dirty, clean the steel plate. When replacing the filter element, refer to the installation steps.
2. Wash the coated surface with neutral soapy water and dry with a clean, soft cloth.
3. Note: Ammonia, toilet cleaner, decontamination powder, and other cleaning agents will damage the electroplated surface, so please do not use these cleaning agents.

Product warranty

1. Warranty period: 2 years
2. Carbon filter rod: Considered a consumable item; once it comes into contact with water or is unsealed, it cannot be replaced (except in cases of defective quality).
3. If the shower cannot function due to a product defect, we will replace the head.
4. If the shower head is damaged due to improper use, the user assumes responsibility.

Filter rod installation

1. Unscrew the shower handle.
2. Remove the old carbon filter rod, peel off the plastic film.
3. Insert the new filter rod into the handle (water outlet facing upwards), then turn it right until tightened.

Additional information

• 3 modes can be seamlessly switched with one button: cleaning, pause, normal.
• Transparent long window on the handle to assess the usage status of the carbon filter; normally, it can be replaced every 3 months.
• To increase service life, use the raw water mode if necessary.

- cleaning - switch left for filtered water

- pause – in the middle

- normal – switch right

If it's not a water pressure problem, replace the filter rod promptly when the water output decreases, and you can unscrew the SS304 faceplate and clean it when the water is dispersed.

Monitor the cleanliness of the carbon filter inside through the long window to replace it in time when the color changes to yellow or black.

Switch the button to raw water mode during normal time to save carbon in the filter.

In filter mode, the operating temperature is 5–60 ℃, and the product lifespan will be shortened when used above 60 ℃.

If the shower has not been used for a long time, it must run for 5-10 seconds when turned on again.